VeeCAD
https://veecad.com/yabb/YaBB.pl
General Category >> VeeCAD General Discussion >> pcb DIN connector/dip switch outlines
https://veecad.com/yabb/YaBB.pl?num=1589355669

Message started by John on May 13th, 2020 at 8:41am

Title: pcb DIN connector/dip switch outlines
Post by John on May 13th, 2020 at 8:41am
does anyone know where i can get outlines for pcb DIN connectors?
also Dip switches (at present i've used an 8dil with the top solid)
John

Title: Re: pcb DIN connector/dip switch outlines
Post by Roger Lascelles on May 13th, 2020 at 11:02am
Hi John

I have put some DIP switches here that might help: http://veecad.com/downloads/DIP_SWITCHES.zip . The download link will work until the next VeeCAD release when the new outlines will be included.

Do the DIN connector pins fit into stripboard? If so, send me drawings and I am happy to draw the outlines.

Title: Re: pcb DIN connector/dip switch outlines
Post by John on May 13th, 2020 at 3:46pm
many thanks for reply Roger.
I'm not sure if the din connectors will fit stripboard.
they seem to be to DIN specification (as is the stripboard),
but here is a link to datasheet for one.
http://www.farnell.com/datasheets/1697491.pdf?_ga=2.101255745.1103046668.1589378948-1062240758.1572261050&_gac=1.207741478.1589380510.EAIaIQobChMIleuz4Yex6QIVWODtCh2GzAauEAQYASABEgKG2vD_BwE

I have an old (used) one & the pins seem to be correct but its been soldered & will not fit,
regards,
John

Title: Re: pcb DIN connector/dip switch outlines
Post by John on May 13th, 2020 at 3:56pm
many thanks Roger, the Dip switches are just what i need
John

Title: Re: pcb DIN connector/dip switch outlines
Post by Roger Lascelles on May 14th, 2020 at 3:58am
The DIN socket fits the grid. I have matched the pin numbers on the Farnell drawing. http://veecad.com/downloads/DIN_Socket.zip

Title: Re: pcb DIN connector/dip switch outlines
Post by John on May 14th, 2020 at 9:38am
many many thanks Roger,
just what i need
regards,
John

VeeCAD » Powered by YaBB 2.5.2!
YaBB Forum Software © 2000-2020. All Rights Reserved.